QarmaQ is Hyundai's Advanced Technology Demonstration Vehicle (ATDV) that showcases over 30 different environmentally progressive technologies led by the innovative “Elastic Front™”, an innovative solution that can help reduce the risk of severe injuries in Crossover Utility Vehicles (CUV) pedestrian collisions.

QarmaQ was designed at Hyundai Motor Europe's Design and Technical Center in Russelsheim and engineered in cooperation with GE Plastics.

The name "QarmaQ" derives from traditional Inuit dwellings, constructed from earth, whalebone and animal skins.

Like them, QarmaQ challenges conventional ideas on construction methods and materials. Also in common with the original structures, it boasts unusual strength, resilience and protection.

QarmaQ develops and validates over 30 key technologies, which will be selectively incorporated into Hyundai’s new models to be rolled out from 2008-2014.

QarmaQ Hyundai Concept Car is lighter, stronger and more economical than any current production CUV in its class. It also offers significant recycling advantages both in construction and eventual disassembly. In short, it is a viable and realistic glimpse of the future potential of personal automotive transport.

As a joint project with GE Plastics, QarmaQ Hyundai Concept Car endowed designers with greater expressive freedom to create complex three-dimensional shapes that could not have been achieved with conventional production methods and materials such as metal and glass.

QarmaQ's 2-liter diesel engine is fully compliant with EURO5 emission regulations. It features the very latest technologies such as high pressure fuel injection and fine fuel spray atomization for higher torque and better power output. Regulated emissions such as CO, THC, NOx and PM, were reduced drastically while a Catalyzed Particulate Filter system, CPF, is capable of cleaning about 90 percent of the particulate matter from the diesel emissions. Furthermore, by switching the position of CPF from the under-floor area to a location more closely coupled to the exhaust manifold, it was possible to minimize the catalytic light-off time and to enhance the naturally regenerative characteristics of the CPF.

Departing from conventional car design that combines a lower body and a glass cabin on top, QarmaQ Hyundai Concept Car blazes a new trail with panoramic wrap-around glazing area using GE’s Lexan™ polycarbonate resin.

This part sits between the two pronounced “muscles” above the front and rear wheels.

The C-shaped side window enables innovative helicopter-like downward visibility and is a key design feature demonstrating the new glazing technology.

Connected by unique glazed surfaces, the exterior design relates strongly to, and interacts effortlessly with the interior. The unique division between the solid bodywork and transparent glazed areas creates a new perspective, whether viewed from inside or from the pedestrian standpoint.

The exterior contours and fluidity of line have been refined to give an immediate impression of movement frozen in motion. This aesthetic is mirrored in the interior, so that the fusion and merging of the perceptual boundaries between inside and out delivers a feeling of integration and synchronization to the overall appearance.

Although QarmaQ Hyundai Concept Car does not have a high waistline or small window area (conventional methods to convey a feeling of protection), the exterior design still communicates a commanding presence and a feeling of protection to the occupants.

QarmaQ Hyundai Concept Car is designed to carry four people in above average comfort. The extensive use of new materials and techniques has resulted in a more fluid and unified interior, by allowing seamless integration of otherwise intrusive elements.

As the sporting exterior proportions suggest, QarmaQ Hyundai Concept Car is primarily a driver’s car.

Within its unique interior architecture the cockpit is isolated in an active, yet protective pod structure. This helps promote a sensorial and highly self-indulgent driving experience.

One of the main aims of the interior design was to develop a practical and interactive space, which wraps around the occupants.

The driver-oriented cockpit, which combines functionality with organic sculpted shapes, creates an attractive, fun-to-drive atmosphere.

Exatec™ infrared coatings on the whole transparent areas reflect heat, helping cool the interior and reducing the power demands upon the infrared regulated air conditioning. Lighting is achieved by incorporating mood illumination into the actual material, delivering a unique interior ambience. The material also facilitates a perfectly flat, fully integrated fractal radio antenna within the roof structure.

Among other milestones in the construction of QarmaQ Hyundai Concept Car, the front wings were designed from the beginning to be one very large single injection moulded component. Together with the deformable bonnet and precise bumper mouldings, these also form a major addition to pedestrian impact safety. The sophistication of the material and manufacturing technique also played a major part in the ability to fully encapsulate the complex headlight shape into the whole frontal styling.

At the other end, the tailgate breaks new ground by bonding different materials, including the glazing and rear light assemblies, to create a one-piece component structure. This increases the integral strength, while at the same time simplifying vehicle assembly and reducing weight.

Another major safety advance is the use of sensors to detect vehicle presence in the blind spots of the rear view mirrors when pulling out or overtaking, and audio-visually alert the driver.

The body of the car is finished with aluminum composite, hard plastic, carbon fiber and glass, giving a foolproof protection to commuters in case of an accident. Replacing the interior rearview mirror, the hybrid features an LCD screen in the main console to display the video captured by the hi-resolution camera located at the rear of the car. The Leonin would set you back something between €18,000 and €25,000, according to the intensity of technology and equipment used in the car.

Kizashi 3 Suzuki Concept Car. Suzuki’s Kizashi “concept” is a teaser of what Suzuki has in store for their upcoming line-up. The Kizashi 1 was a rather funky looking station wagon. The Kizashi 2 was a SUV. Finally, the Kizashi 3 is what you see above, a sport sedan.

Suzuki Concept Kizashi 3 is the third iteration of the Kizashi concept which was revealed at the New York International Auto Show. Kizashi features an AWD system with 300 HP 3.6 Litre V6 engine. Kizashi is an impressive looking concept from Suzuki to-date. However, it yet remains to be seen if Suzuki would be able to compete with Camry and Accord when it hits the US market in 2010.

Kizashi 3 Suzuki Concept Car. The Concept Kizashi 3, which suggests both Suzuki’s future design direction and stated intent to offer a larger, more upscale sport sedan, will be joined in New York by the North American debuts of the Concept Kizashi and Concept Kizashi 2.

The Kizashi concept series was developed by Suzuki’s Advanced Design Group to reflect a dynamic athlete in motion, taking its design cues from a strong, honed physique while displaying the performance, strength and style befitting a flagship vehicle.

Kizashi 3 Suzuki Concept Car

The Concept Kizashi 3 will represent the completion of the Kizashi concept series as well as providing a closer-to-production vision of a future Suzuki sport sedan offering.

The Suzuki Kizashi 3 has a five seat configuration with a front engine, four-wheel drive with Advanced i-AWD system.

The closest-to-production variation of the Concept Kizashi series, Concept Kizashi 3 embodies Suzuki’s interpretation of the sport sedan segment in the North American market. The Kizashi’s “super sport” identity, a core component of the Suzuki brand DNA, is tempered by the vehicle’s overall mission to provide strong, refined urban performance.

Kizashi 3 Suzuki Concept Car

As with Concept Kizashi and Concept Kizashi 2, the front end of the Concept Kizashi 3 expresses strength and style, with sharply fashioned headlights that emphasize the sensation of forward motion. The vehicle’s exquisitely engineered body reflects Suzuki’s distinctive combination of capability and refinement, with power flowing from a 3.6-liter DOHC V6 engine 24-valve engine developing 300 hp that is coupled with a six-speed automatic (with paddle shifters) gearbox and with plated cylinders — a weight-and space-saving technology that evolved from the lessons learned by Suzuki’s motorcycle and WRC development teams. The body’s monochrome finish, Kizashi Silver, gives the vehicle a sense of composure and depth of character, with metallic paint sparkling to emphasize the dynamism of the body’s cross-section.

Kizashi 2 Suzuki  Concept Car. The Suzuki Kizashi 2 Concept is a crossover sports wagon whose design conveys the dynamism of a top athlete and inspires a powerful sense of excitement.

Kizashi 2 Suzuki  Concept Car

As for design two keywords, "dignity" and the "stirring impression" adopting the emotional silhouette which raises the satisfaction which uplift impression is owned to running for the axis. As for the 3.6LV type 6 cylinder engine of the sea bass maximum aerodynamic volume displacement not only strong acceleration feeling with the combination with 6 speeds AT, and at high speed regarding cruising, actualizing the running which exceeds class. In addition, you are inserting also the hybrid engine and the like which considers in environment in range of vision.

Kizashi 2 Suzuki  Concept Car